Extrusion & Post
11 조회수
Dimensional Fluctuation of Polypropylene Extruded Products
문제 현상
The outer diameter, wall thickness, or width of the extruded product fluctuates periodically or randomly in the longitudinal direction.
Dimensional fluctuation affects the fitting precision and use performance of the product, and is common in pipe and profile extrusion.
원인 분석
(1) The screw speed is unstable, and the discharge amount fluctuates
(2) The haul-off speed is unstable and does not match the extrusion speed
(3) The barrel temperature fluctuates greatly, and the melt viscosity changes
(4) The raw material feeding is uneven, and the feeding fluctuates
(5) The cooling water temperature or flow fluctuates
해결 방법
(1) Check the extruder drive system and stabilize the screw speed
(2) Check the speed regulation system of the haul-off machine to ensure stable haul-off speed
(3) Stabilize the barrel temperature, with fluctuation controlled within ±3°C (range 200-280°C)
(4) Check the feeding of the hopper to ensure continuous and uniform feeding
(5) Stabilize the cooling water temperature and flow, and add a constant temperature device when necessary
핵심 요약
Dimensional fluctuation is caused by unstable extrusion or haul-off, and all process parameters need to be systematically stabilized.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!