Material Analysis
11 조회수
Mechanical Properties of Polypropylene Extruded Products Not Up to Standard
문제 현상
The tensile strength, impact strength, or pressure resistance of the product is lower than the standard requirement.
Mechanical properties not up to standard directly affect the use safety of the product, and are especially important in pipes and structural products.
원인 분석
(1) Degradation of the raw material leads to a decrease in molecular weight
(2) The plasticization is uneven, and there are unmelted particles in the melt
(3) The cooling rate is improper, and the crystallinity is unsuitable
(4) The product wall thickness is insufficient or there are bubbles
(5) The regrind ratio is too high
해결 방법
(1) Control the barrel temperature within the range of 200-280°C to avoid overheating degradation
(2) Optimize the screw design and rotation speed to ensure full plasticization
(3) Adjust the cooling conditions to ensure suitable crystallinity
(4) Check the product wall thickness and internal quality to eliminate bubbles
(5) Control the regrind ratio to not exceed 20%
핵심 요약
Mechanical properties not up to standard are caused by material degradation or poor processing quality, and need to be solved from temperature control and plasticization quality.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!