Injection Molding
11 조회수
Roundness out of tolerance of homopolymer polypropylene injection products
문제 현상
The cross-section of round products is not round, ovality out of tolerance, affecting sealing performance and fitting accuracy.
Out-of-tolerance roundness is common in tubular products, bottle caps, gears and other round products, closely related to uneven shrinkage and cooling differences.
원인 분석
(1) Uneven cooling of mold cavity and core, large shrinkage rate differences in different directions
(2) Anisotropic shrinkage of homopolymer polypropylene; different shrinkage in flow direction and perpendicular direction
(3) Improper gate position; single-side feeding causes asymmetric molecular orientation
(4) Uneven holding pressure distribution, inconsistent shrinkage compensation in each cavity direction
(5) Uneven product wall thickness, large shrinkage differences between thick and thin parts
해결 방법
(1) Optimize mold cooling system, arrange cavity and core cooling water channels symmetrically
(2) Control mold temperature uniformity, temperature difference of each part not exceeding 5°C (40-90°C range)
(3) Adopt multi-point gates or ring gates, make melt fill the mold uniformly to reduce orientation differences
(4) Optimize holding pressure scheme, ensure uniform shrinkage compensation in all cavity directions
(5) Optimize product design, wall thickness as uniform as possible, inner and outer circles concentric
핵심 요약
Out-of-tolerance roundness is caused by non-uniform shrinkage; it needs to be improved from cooling symmetry, gate design, and wall thickness uniformity.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!