Extrusion & Post
12 조회수
Poor transparency of homopolymer polypropylene blown film
문제 현상
Film haze is high, transparency does not meet requirements.
Poor transparency affects product appearance and display effect, especially important in packaging film and optical film.
원인 분석
(1) High crystallinity of homopolymer polypropylene; crystalline regions scatter light causing high haze
(2) Melt temperature too low, insufficient plasticization
(3) Slow cooling rate, high crystallinity
(4) Impurities or gels in raw material
(5) Rough film surface
해결 방법
(1) Appropriately increase extrusion temperature to the higher value within the 200-280°C range, full plasticization
(2) Improve air ring cooling efficiency, speed up cooling to reduce crystallinity
(3) Select grades with good transparency or add nucleating agents to refine grains
(4) Strengthen filtration, use 80-120 mesh filter screens to remove impurities
(5) Polish the die, improve film surface finish
핵심 요약
Poor transparency is caused by high crystallinity or impurities; it needs to be improved by increasing temperature, speeding up cooling, and selecting appropriate materials.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!