메뉴
재료 기계
인사이트
기사 동영상 문제 및 해결책
About
Chembull 소개 미디어 파트너
문의하기
언어
EnglishالعربيةPortuguêsEspañolDeutschTürkçe한국어
문제 및 해결책으로 돌아가기
Material Drying 12 조회수

Random copolymer polypropylene pipe special material (Nordic standard) Random copolymer polypropylene pipe special material (Nordic standard) defects caused by insufficient drying before processing(Variant: Strengthened Measures)

문제 현상
Silver streaks, bubbles and surface roughness appear on the product surface, and mechanical properties decline. The consequences of insufficient drying cover multiple defect types and are a common problem in plastics processing.In particular, extra attention is needed on top of the original basis, this problem is more prominent and requires key attention.
원인 분석
(1)The raw material absorbs moisture (although the random copolymer polypropylene pipe special material (Nordic standard) has low water absorption, long-term exposure still absorbs water)\ (2)Drying temperature too low or drying time insufficient\ (3)Drying equipment failure or insufficient dehumidification capacity\ (4)The dried raw material is left in a humid environment for too long and re-absorbs moisture\ (5)Regrind not dried or insufficiently dried\ (6)On top of the original basis, extra attention is needed: process parameter fluctuations or equipment status changes aggravate this problem
해결 방법
(1)Use a dehumidifying dryer, drying temperature 60-80°C, time 2-4h\ (2)Control moisture content after drying below 0.02% (random copolymer polypropylene pipe special material (Nordic standard))\ (3)Seal the dried raw material for storage, cover the hopper, exposure to air not exceeding 2h\ (4)Regrind dried the same as virgin material\ (5)Control workshop environment humidity below 60%\ (6)And strengthen process monitoring; on top of the original basis, extra attention is needed, paying special attention to parameter stability
핵심 요약
Insufficient drying is a common root cause of processing defects, requiring the establishment of a sound drying system and moisture content testing system.Targeted preventive measures need to be taken in different production scenarios.
raw '2079851475616104451moisture contentsilver streaksbubblesdehumidifying drying

이 정보가 도움이 되었나요?

0 명이 도움이 되었다고 합니다

ChemAI