Extrusion & Post
10 조회수
Dimensional fluctuation of random copolymer polypropylene pipe special material extruded products (Variant: mass production scenario)
문제 현상
The outer diameter, wall thickness, or width of the extruded product fluctuates periodically or randomly in the longitudinal direction.
Dimensional fluctuation affects the fitting accuracy and use performance of the product, and is common in pipe and profile extrusion.
In particular, in continuous mass production, this problem is more prominent and needs key attention.
원인 분석
（1）The screw speed is unstable, and the output fluctuates
（2）The haul-off speed is unstable and does not match the extrusion speed
（3）The barrel temperature fluctuates greatly, and the melt viscosity changes
（4）The raw material feeding is uneven, and the feeding fluctuates
（5）The cooling water temperature or flow rate fluctuates
（6）In continuous mass production, process parameter fluctuations or equipment status changes have aggravated this problem
해결 방법
（1）Check the extruder drive system and stabilize the screw speed
（2）Check the haul-off machine speed control system to ensure stable haul-off speed
（3）Stabilize the barrel temperature, and control the fluctuation within ±3°C (within the range of 200-220°C)
（4）Check the hopper feeding to ensure continuous and uniform feeding
（5）Stabilize the cooling water temperature and flow rate, and add a constant temperature device if necessary
（6）And establish standardized work instructions, with special attention to parameter stability in continuous mass production
핵심 요약
Dimensional fluctuation is caused by unstable extrusion or haul-off, and each process parameter needs to be systematically stabilized.
In different production scenarios, targeted preventive measures need to be taken.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!