Processing Machinery
4 조회수
Large current fluctuation of the random copolymer polypropylene pipe special material extruder (Variant: strengthened measures)
문제 현상
The ammeter reading of the extruder main motor fluctuates greatly, exceeding the normal range.
Current fluctuation reflects unstable screw torque, and may be a precursor of poor plasticization or mechanical failure.
In particular, extra attention is needed on the original basis, this problem is more prominent and needs key attention.
원인 분석
（1）The barrel temperature is improperly set, and the plasticizing section temperature is too low and the screw torque is large
（2）Hard impurities are mixed into the raw material
（3）The screw and barrel are worn, and the clearance increases
（4）The feeding is uneven, sometimes more and sometimes less
（5）The filter screen is severely blocked, and the die head resistance is large
（6）On the original basis, extra attention is needed: process parameter fluctuations or equipment status changes have aggravated this problem
해결 방법
（1）Optimize the barrel temperature to ensure that the plasticizing section temperature is at a reasonable value within the range of 200-220°C
（2）Check the purity of the raw material, and install a magnetic frame on the hopper
（3）Check the wear of the screw and barrel, and replace them if necessary
（4）Ensure continuous and uniform feeding to prevent bridging
（5）Regularly replace the filter screen to prevent blockage
（6）And strengthen process monitoring; on the original basis, extra attention is needed, with special attention to parameter stability
핵심 요약
Current fluctuation is caused by large plasticizing resistance or equipment problems, and needs to be solved from temperature control, raw material purity, and equipment maintenance.
In different production scenarios, targeted preventive measures need to be taken.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!