Injection Molding
11 조회수
Whitening in the gate area of PET preforms
문제 현상
A white opaque area appears near the gate of the PET preform, with reduced strength, sometimes accompanied by cracks.
원인 분석
Excessively high shear rate at the gate causes stress-induced crystallization, producing micro crystal grains that scatter light; gate size is too small or injection speed is too fast.
해결 방법
Increase gate diameter to ≥0.8-1.2mm; reduce injection speed (multi-stage injection); increase mold temperature in this area.
핵심 요약
PET gate whitening is the result of stress-induced crystallization; reducing shear is the fundamental measure.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!