Injection Molding
4 조회수
PETG and metal insert poor bonding
문제 현상
When PETG is injection molded over metal inserts, the bonding is not tight, and gaps or looseness appear around the insert.
원인 분석
The metal insert temperature is low and it cools and shrinks rapidly upon contacting PETG, the insert surface is untreated and bonding is poor, thermal expansion coefficients differ greatly.
해결 방법
Preheat the insert to 80-120°C; roughen the insert surface or apply primer; reserve a shrinkage gap in the product design.
핵심 요약
PETG overmolding of metal inserts requires insert preheating and surface treatment.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!