문제 및 해결책

일반적인 플라스틱 재료 문제에 대한 실질적인 답변

기사 둘러보기 →

Q

Uneven thickness of BOPP film

A

BOPP thickness uniformity is jointly determined by cast sheet quality and stretching consistency; online thickness measurement closed loop is the standard configuration of modern production lines.; after confirming effectiveness, solidify the parameters and practices into the work instruction to ...

Extrusion & Post PP; BOPP; uneven thickness; die head; stretching; thickness measurement

Q

Delamination of PP products overmolded with TPE/TPU

A

For PP overmolding delamination, grasp the three points of 'grade matching + interface temperature + differential shrinkage': the soft and hard rubbers must be bondable, the substrate must be preheated, and the mold must be designed for differential shrinkage—all three are indispensable.

Extrusion & Post PP; TPE; TPU; overmolding; delamination; differential shrinkage

Q

Wrong use of PP homopolymer/copolymer grades

A

For PP material selection, first distinguish 'homopolymer or copolymer': choose homopolymer for rigidity, copolymer for impact resistance and low temperature resistance; many 'quality problems' are actually material selection errors, which cannot be compensated no matter how good the process is.

Production & Quality PP; homopolymer; copolymer; material selection; grade

Q

Sink marks on thick-wall PP parts (freeze-off type)

A

For PP thick-wall sink marks, first check 'gate freeze-off': after freeze-off, holding pressure is given for nothing; enlarging the gate, moving it closer to the thick wall, or directly reducing material is far more effective than blindly extending the holding pressure time.

Molds & Tooling PP; sink mark; gate freeze-off; holding pressure; thick wall; material reduction

Q

Plasticization fluctuation in PP '2079851475616104452

A

For unstable PP plasticization, first check 'feeding': bridging and regrind are common culprits; include plasticizing time in process monitoring—it often alarms before the product goes wrong.

Injection Molding PP; plasticization fluctuation; bridging; regrind; feeding

Q

Secondary deformation of PP products after packaging

A

PP 'packing hot parts = a source of secondary deformation': write 'cool thoroughly before packing' into the SOP and optimize the liner to distribute the load; many 'mold deformation' complaints are actually caused by the packaging and logistics links.

Material Analysis PP; deformation; packaging; creep; stacking; logistics

Q

Overall lack of gloss on PP products

A

PP gloss = the three elements of 'replication + mold + grade': mold temperature and holding pressure determine replication, polishing determines the upper limit, and the grade determines the ceiling; before making high gloss, first confirm whether the grade can be glossy, then talk about the proc...

Molds & Tooling PP; gloss; surface replication; polishing; mold temperature; grade

Q

Brittle edges and crumb shedding of PP products

A

PP brittle edges = check both 'stress + degradation': first reduce stress (fillets, holding pressure), then control degradation (temperature, regrind), and finally manage trimming tools well; edge problems are often a barometer of the stress state of the whole part.

Molding Process PP; brittle edge; stress; holding pressure; degradation; trimming

Q

Cavity-to-cavity inconsistency in PP multi-cavity molds

A

For multi-cavity molds, do a 'filling balance test' first before talking about the process window: when the runners are unbalanced, any process adjustment is just robbing Peter to pay Paul; cavity-to-cavity consistency must be guaranteed by the hardware balance of runners and cooling.

Molds & Tooling PP; multi-cavity; runner balance; uneven filling; cooling

Q

Whitening of PP weld lines

A

PP weld line whitening = 'cold front + enrichment of gas and impurities': the three axes of raising temperature, venting, and setting overflow wells will obviously reduce the white line; plan the gate in advance for appearance parts to hide the weld line.

Molds & Tooling PP; weld line; whitening; venting; overflow well

이전 1 ... 705 706 707 708 709 710 711 ... 1164 다음

카테고리

전체 주제 11636 Material Drying 1439 Injection Molding 1506 Molding Process 740 Molds & Tooling 1506 Processing Machinery 2025 Extrusion & Post 2239 Blow Molding 315 Thermoforming 141 Material Analysis 1343 Production & Quality 382