문제 및 해결책

일반적인 플라스틱 재료 문제에 대한 실질적인 답변

기사 둘러보기 →

Q

Melt fracture (sharkskin) in PP extrusion

A

The main line for PP extrusion surface roughness is 'reduce exit shear': use the four-piece set of raising temperature, reducing speed, polishing, and adding PPA in order; when pursuing output, especially find the critical balance point between speed and surface quality.

Extrusion & Post PP; extrusion; melt fracture; sharkskin; die temperature; PPA

Q

Black specks (carbonized spots) in PP '2079851475616104452

A

PP black specks come from carbon deposits in equipment dead spots or material source contamination nine times out of ten; 'purging the machine + checking the material source' is far more effective than adjusting parameters; treating black specks as a process problem and testing repeatedly will on...

Injection Molding PP; black specks; carbonization; dead spots; machine purging; contamination

Q

Warpage of glass fiber reinforced PP

A

The orientation-type warpage of GF-PP is a 'gate-determined material problem'; the main attack direction is gate design and orientation analysis, not cooling; treating warpage as a problem solvable by temperature adjustment often leads to the trap of repeated mold trials.

Molds & Tooling PP; glass fiber; warpage; fiber orientation; gate; Moldflow

Q

Uneven surface gloss of PP products

A

PP gloss consistency = consistency of pressure and temperature distribution: first make the mold temperature uniform and transmit the pressure in place, then talk about polishing; batch-to-batch gloss drift mostly requires going back to check the regrind and color masterbatch, rather than repeate...

Molds & Tooling PP; uneven gloss; surface replication; mold temperature; holding pressure; color masterbatch

Q

Sticking of PP products to the mold (difficult demolding)

A

For PP mold sticking, first 'reduce pressure and temperature' to lessen gripping, then 'fix draft and polish' to reduce resistance, and finally deal with deep-cavity vacuum suction; the polishing quality of the mold along the demolding direction often affects the feel of 'easy or hard to demold' ...

Molds & Tooling PP; mold sticking; gripping force; draft angle; polishing; vacuum suction

Q

PP jetting marks (snake patterns)

A

The mantra for jetting marks is 'let the material hit the wall as soon as it enters': through gate design and the speed curve, make the melt front cling to the cavity wall as soon as it enters; once the melt spreads along the wall, the snake patterns naturally disappear—more effective than simply...

Injection Molding PP; jetting marks; snake patterns; gate; injection speed; front

Q

Short shot (material shortage) in PP '2079851475616104452

A

For PP short shots, first check 'speed and pressure', then check 'temperature and venting', and finally evaluate structure and grade; the short-shot method (stepwise filling) can quickly locate the last fill point, avoiding flash caused by blindly raising temperature and pressure.

Injection Molding PP; short shot; material shortage; injection speed; venting; wall thickness

Q

Tiger stripes (flow marks) on PP automotive parts

A

Tiger stripes are the 'flow imprint' of the phase distribution of copolymer PP; the core is to stabilize the front and the gate shear, and process-wise the main measures are stable speed and higher temperature; stubborn parts often require a material grade upgrade and cannot be expected to be cur...

Injection Molding PP; tiger stripes; flow marks; injection speed; rubber phase; front

Q

Insufficient weld line strength of PP

A

PP weld lines are difficult to eliminate completely; the correct approach is the three-pronged 'relocate the position + increase the convergence temperature + improve venting', and to avoid it in advance as a structural design issue rather than forcing adjustments on the machine afterward.

Molds & Tooling PP; weld line; knit line; venting; gate position; crystallization

Q

Flash on PP '2079851475616104452 (burrs)

A

For PP flash, first 'do subtraction' on the process (reduce pressure, reduce temperature), then 'fill the gaps' on the mold (repair fits, increase clamping); adding clamping force right away regardless of pressure easily crushes the vents and accelerates mold wear.

Injection Molding PP; flash; burr; clamping force; parting line; low viscosity

이전 1 ... 707 708 709 710 711 712 713 ... 1164 다음

카테고리

전체 주제 11636 Material Drying 1439 Injection Molding 1506 Molding Process 740 Molds & Tooling 1506 Processing Machinery 2025 Extrusion & Post 2239 Blow Molding 315 Thermoforming 141 Material Analysis 1343 Production & Quality 382