Problem & Solution

Practical answers to common plastic material challenges

Browse Articles →

HDPE melt temperature 200-280℃

Injection Molding HDPE; melt temperature; 200-240℃; 280℃; degradation

HDPE injection molded part warpage deformation

Injection Molding HDPE; '2079851475616104452; warpage; crystallization shrinkage; cooling; gate

HDPE injection molded part sink marks

Injection Molding HDPE; '2079851475616104452; sink mark; shrinkage; holding pressure; wall thickness

HDPE injection molded product yellowing

Yellowing = heat history exceeding the standard.

Injection Molding HDPE; yellowing; degradation; melt temperature; antioxidant

HDPE injection molded product sink marks - thick-walled type

For thick-wall sink marks, structural material reduction is prioritized.

Injection Molding HDPE; '2079851475616104452; sink mark; thick wall; material reduction

HDPE injection molded product warpage — ejection-induced

Ejection deformation = insufficient cooling + uneven ejection.

Injection Molding HDPE; '2079851475616104452; ejection deformation; cooling; ejector pins

HDPE '2079851475616104452 mold sticking

Mold sticking = holding force management.

Injection Molding HDPE; '2079851475616104452; mold sticking; holding force; draft angle

HDPE injection molded product color fading

Injection Molding HDPE; color difference; color masterbatch; temperature resistance; light fastness

HDPE injection molded product surface flow marks

Flow marks = a front management problem.

Injection Molding HDPE; '2079851475616104452; flow mark; mold temperature; speed curve

HDPE injection molded product melt temperature unevenness

Melt uniformity relies on back pressure and screw mixing.

Injection Molding HDPE; '2079851475616104452; melt unevenness; back pressure; mixing

Prev 1 ... 138 139 140 141 142 143 144 ... 151 Next