Problem & Solution

Practical answers to common plastic material challenges

Browse Articles →

Injection Speed Curve Mismatch in PBT '2079851475616104452

PBT multi-stage injection requires precise consideration of the filling process.

Injection Molding PBTinjection speedmulti-stage injectionmold flow analysis

Mold Corrosion Caused by Poor Cooling Water Quality During PBT '2079851475616104452

PBT mold cooling water management extends mold life.

Injection Molding PBTcooling watermold corrosionwater quality

Ejector Whitening of PBT Injection-Molded Products

PBT ejector whitening is the result of excessive local stress.

Injection Molding PBTejector whiteningdemoldingejection force

Burning During High-Speed Filling of PBT '2079851475616104452

PBT burning originates from insufficient venting.

Injection Molding PBTburningventingdiesel effect

Crystalline White Spots Near the Gate of PBT Injection-Molded Parts

PBT gate white spots are the result of shear-induced crystallization.

Injection Molding PBTgate white spotshear crystallizationgate size

Cracking of PBT Injection-Molded Parts During Assembly

PBT assembly cracking is an extension of stress management.

Injection Molding PBTassembly crackinginternal stressannealingdesign

Improper Screw Speed of PBT '2079851475616104452 Machine

The PBT screw speed needs to balance plasticization and shear heat.

Injection Molding PBTscrew speedshear heatplasticization

Bonding Strength Between PBT Injection-Molded Parts and Metal Inserts

The bonding between PBT and metal inserts is a key quality of electrical connectors.

Injection Molding PBTinsertbonding strengthpreheatinganchoring

Uneven Mold Temperature Distribution in PBT '2079851475616104452

The uniformity of PBT mold temperature is the basis of product consistency.

Injection Molding PBTmold temperatureuniformitycooling water channelscale

Unreasonable Section Temperatures in PBT '2079851475616104452

PBT section temperature control is the basis of precision '2079851475616104452.

Injection Molding PBTsection temperatureplasticizationtemperature control curve

Prev 1 ... 20 21 22 23 24 25 26 ... 151 Next