Problem & Solution

Practical answers to common plastic material challenges

Browse Articles →

Surface Static Electricity Problem of Biaxially Oriented Polypropylene Film Products

The static electricity problem is caused by the high insulation of the material.

Molding Process static electricityantistatic agentvolume resistanceambient humiditysurface treatment

Surface Static Electricity Problem of Biaxially Oriented Polypropylene Film Products

The static electricity problem is caused by the high insulation of the material.

Molding Process static electricityantistatic agentvolume resistanceambient humiditysurface treatment

Influence of cooling air temperature, air speed, and distance on fiber crystallization and diameter

Molding Process spinning coolingair temperatureair speedcrystallization

Weldability of POM products

POM welding is a difficult point of the assembly process.

Molding Process POMweldingultrasonicfrictionself-lubricating

POM has excellent creep resistance but is notch sensitive

POM notch sensitivity is a design safety factor requirement.

Molding Process POMnotchimpactdesignfillet

Large warpage deformation of POM products

POM warpage is a direct consequence of its crystalline characteristics.

Molding Process POMwarpageanisotropycoolingglass fiber

Gel particles on the surface of PMMA extruded sheets

PMMA gel particles affect optical quality.

Molding Process PMMAgel particleimpuritiesfiltration

Internal bubbles and shrinkage cavities of PMMA thick-walled parts

PMMA thick-walled shrinkage cavities are the result of insufficient holding pressure.

Molding Process PMMAthick wallshrinkage cavityholding pressure

Shrinkage and bubbles of PMMA cast sheets

The quality of PMMA cast sheets depends on polymerization process control.

Molding Process PMMAcastingpolymerization shrinkagebubbledegassing

Low-temperature brittleness of PMMA products

PMMA is limited in low-temperature applications.

Molding Process PMMAlow temperatureembrittlementtoughening

Prev 1 2 3 4 5 6 7 8 ... 74 Next