Problem & Solution

Practical answers to common plastic material challenges

Browse Articles →

Wavy edge of PETG extruded sheet

PETG wavy edge affects the subsequent use of the sheet.

Extrusion & Post PETG wavy edge die lip gap edge cooling

Flow marks on PETG extruded sheet

PETG sheet flow marks point to die head flow channel design problems.

Extrusion & Post PETG sheet flow mark die head flow channel

Interlayer fluctuation of PETG multi-layer co-extrusion composite film

Extrusion & Post PETG multi-layer co-extrusion layer thickness fluctuation distributor

PETG product dimensional change in hot water

PETG hot water dimensional stability is limited.

Extrusion & Post PETGhot waterdimensional changeannealing

PETG product post-shrinkage

PETG post-shrinkage affects dimensional accuracy.

Extrusion & Post PETGpost-shrinkageannealingcooling

PETG '2079851475616104452 heat deflection temperature test value low

PETG HDT is affected by internal stress; annealing can increase the test value.

Extrusion & Post PETGheat deflection temperatureHDTannealing

PETG poor compatibility with inks and coatings, undercutting

PETG coating requires attention to solvent system selection.

Extrusion & Post PETGcoatingundercuttingsolvent erosion

PETG UV-curable coating insufficient adhesion

PETG UV coating adhesion depends on surface treatment and formulation optimization.

Extrusion & Post PETGUV coatingadhesioncorona

PETG extruded pipe surface corrugation

Extrusion & Post PETGpipesurface corrugationmelt fracturehaul-off

PETG recycled pelletizing pellet yellowing

Extrusion & Post PETGrecyclingpelletizingyellowingthermal history

Prev 1 ... 4 5 6 7 8 9 10 ... 224 Next