Extrusion & Post
6 görüntüleme
ABS annealing deformation recurrence
Sorun Belirtisi
[Problem Phenomenon] ABS stable short-term after annealing, recurrence after storage
Neden Analizi
Annealing temperature and time insufficient; amorphous annealing window narrow; during on-site troubleshooting, verify item by item according to this mechanism, avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry materials and should be confirmed first during troubleshooting
Çözüm
Hold at heat distortion temperature -10~15℃ for sufficient time; slow cooling; verify storage; after adjustment, continuously sample to verify the effect, resume mass production only after confirming stability; change only one variable each time and record parameter changes to facilitate locating effective measures
Temel Çıkarım
ABS annealing temperature and time must be sufficient, slow cooling sets the shape; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!