Processing Machinery
5 görüntüleme
LLDPE film material changeover transition
Sorun Belirtisi
When changing from LDPE to LLDPE, transition material is large and fluctuation time is long.
Neden Analizi
The two materials have large viscosity differences, and the melt state keeps changing during replacement; heating and speed-up need to proceed step by step.; During on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based only on experience.
Çözüm
①Adjust temperature and speed stepwise; ②monitor bubble state during the transition; ③record transition time to optimize the process; ④reasonably arrange the changeover sequence.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability.
Temel Çıkarım
Material changeover transition is a cost point of LLDPE production; a standardized process can shorten the transition time.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!