Processing Machinery
8 görüntüleme
LLDPE back pressure control
Sorun Belirtisi
Excessive back pressure increases gel in LLDPE film
Neden Analizi
Shear heat from high back pressure causes local overheating and crosslinking; when troubleshooting on site, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Çözüm
Control back pressure at low limit; measure actual melt temperature; check back pressure for gel; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
Temel Çıkarım
LLDPE back pressure should be low to prevent gel; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!