Processing Machinery
4 görüntüleme
PP Toughening Modification
Sorun Belirtisi
[Problem Phenomenon] PP is brittle at low temperature and needs toughening improvement
Neden Analizi
PP is toughened with EPDM/POE elastomers to improve low-temperature impact resistance; used for parts with high low-temperature requirements such as automotive bumpers; toughening sacrifices some rigidity; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
Çözüm
Select toughened PP for low-temperature impact parts; POE toughening retains transparency well; select the ratio according to the rigidity-toughness balance; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Temel Çıkarım
PP toughening uses EPDM/POE; low-temperature impact rises while rigidity gives way a bit; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar future problems
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!