Processing Machinery
4 görüntüleme
PVC Screw Speed
Sorun Belirtisi
After increasing the screw speed, degradation spots in PVC products increased
Neden Analizi
Higher speed increases shear heat, raising the actual melt temperature; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Çözüm
Control screw speed at medium-low speed; output is guaranteed by time, not by speed; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
Temel Çıkarım
PVC screw speed should be low rather than high; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!