Injection Molding
6 görüntüleme
TPU Injection Pressure Grading
Sorun Belirtisi
Thin-wall parts are not fully filled, or excessively high pressure produces flash and internal stress cracking
Neden Analizi
TPU injection pressure is graded by structure: medium pressure for general parts, high pressure for thin-wall long-flow parts; excessively high pressure produces flash and internal stress, causing cracking during demolding; when troubleshooting on site, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
Çözüm
①Set injection pressure graded according to product structure; ②Appropriately increase for thin-wall parts; ③Reduce pressure when flash and cracking occur; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Temel Çıkarım
TPU pressure setting should be tailored to each part; high pressure buys filling, but also brings flash and stress risks; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!