Extrusion & Post
11 görüntüleme
EEA Screw Slipping
Sorun Belirtisi
During EEA extrusion, the screw slips, feed does not advance, output drops sharply
Neden Analizi
EEA pellets melt too early in the feeding section, forming a lubricating film causing screw slip; feeding section temperature too high
Çözüm
1) Lower the feeding section temperature by 10-15°C to delay melting; 2) Deepen the feeding section flight to increase material grip; 3) Dry the pellet surface to reduce lubrication
Temel Çıkarım
Screw slipping is caused by premature melting; cooling the feeding section is key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!