Extrusion & Post
11 görüntüleme
EMA Extrusion Pelletizing Connected Pellets
Sorun Belirtisi
During EMA extrusion pelletizing, pellets are connected and not completely cut off, forming a bead-string shape
Neden Analizi
EMA is soft; the knife cuts in during pelletizing but elastic recovery makes the cut surfaces re-bond; pelletizing water temperature low <40°C, not fully solidified; cutter speed does not match extrusion speed
Çözüm
1) Increase pelletizing water temperature to 50-60°C, cut after full solidification; 2) Increase cutter speed to ensure fast cutting; 3) Cutter gap 0.01-0.02mm to ensure clean cutting; 4) Rotary cutter instead of flat cutting to reduce connected pellets
Temel Çıkarım
Connected pellets are caused by elastic recovery and low-temperature pelletizing; high-temperature water cutting and fast cutting are key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!