Extrusion & Post
11 görüntüleme
EVOH extrusion feeding is unstable
Sorun Belirtisi
EVOH extrusion feeding amount fluctuates ±15%, causing unstable extrusion pressure and product dimensions
Neden Analizi
Irregular EVOH pellet shape causing unstable filling rate of the feeding screw; bridging or voids in the hopper; feeding screw design unsuitable
Çözüm
1) Use a loss-in-weight feeder to precisely control feeding amount; 2) Install a vibrator on the hopper to prevent bridging; 3) Pelletize EVOH to uniform 2-3mm particle size; 4) Change the feeding screw to a dedicated design
Temel Çıkarım
Unstable feeding is caused by pellet characteristics; loss-in-weight feeding and anti-bridging are core
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!