Molding Process
8 görüntüleme
Coarse Internal Crystallization of EVOH
Sorun Belirtisi
Internal spherulites of EVOH products >50μm coarse, causing decreased transparency and low impact
Neden Analizi
Cooling rate too slow <5°C/min allowing spherulites to fully grow; no nucleating agent used to control crystallization
Çözüm
1) Increase cooling rate to >20°C/min to refine spherulites; 2) Add 0.2-0.3wt% nucleating agent to control crystallization; 3) Lower mold temperature to accelerate cooling
Temel Çıkarım
Coarse crystallization is caused by slow cooling; fast cooling and nucleating agent are key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!