Extrusion & Post
11 görüntüleme
Severe Screw Wear of PU Extruder
Sorun Belirtisi
After 200h of PU extrusion, screw and barrel wear reaches 0.5mm
Neden Analizi
Filler causes large wear on the screw; screw material hardness insufficient, not nitrided; processing temperature too high causing PU to adhere to the screw, aggravating wear
Çözüm
1) Use nitrided screw or bimetallic screw SK-2 alloy; 2) Reduce processing temperature to decrease adhesive wear; 3) Treat filler with coupling agent to reduce friction; 4) Regularly check wear, replace promptly when >0.3mm
Temel Çıkarım
Screw wear is caused by filler friction and adhesion; wear-resistant screw and temperature control are key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!