Extrusion & Post
11 görüntüleme
Bending deformation of PVA extruded profile
Sorun Belirtisi
PVA extruded profile continuously bends after cooling, bending deviation >5mm/m
Neden Analizi
Uneven cooling of each face of the profile causes shrinkage difference; uneven die outflow velocity makes each wall thickness of the profile different; haul-off and extrusion centerlines misaligned, producing lateral force
Çözüm
1) Optimize cooling system to ensure uniform cooling of each face; 2) Adjust the die so that flow velocity of each wall is uniform and wall thickness consistent; 3) Align haul-off and extrusion centerlines; 4) Increase sizing sleeve length, cool after full sizing
Temel Çıkarım
Profile bending is caused by uneven cooling and uneven flow velocity; homogenization and alignment are the key to solution
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!