Extrusion & Post
11 görüntüleme
CEF screw slipping
Sorun Belirtisi
During CEF extrusion, the screw slips, the feeding does not advance, and the output drops sharply
Neden Analizi
The CEF particles melt too early in the feeding section, forming a lubricating film and causing the screw to slip; the feeding section temperature is too high
Çözüm
1) Reduce the feeding section temperature by 10-15°C to delay melting; 2) Deepen the feeding section thread to increase the gripping force; 3) Dry the particle surface to reduce lubrication
Temel Çıkarım
Screw slipping is caused by premature melting; reducing the feeding section temperature is the key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!