Extrusion & Post
11 görüntüleme
Glass Fibre extruded film has gel particles
Sorun Belirtisi
Glass Fibre extruded film surface shows 0.1-0.5mm transparent gel particles
Neden Analizi
High molecular weight component in Glass Fibre not fully melted during extrusion, forming local high-crystallinity regions; extrusion temperature too low or mixing insufficient
Çözüm
1) Raise extrusion temperature 5-10°C to ensure full melting; 2) increase screw mixing section length; 3) inspect raw material to ensure grade consistency; 4) replace with finer screen 120 mesh to intercept unmelted particles
Temel Çıkarım
Gel particles are caused by insufficient melting; raising temperature and mixing are key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!