Processing Machinery
5 görüntüleme
Instability during the replacement transition with organotin stabilizers
Sorun Belirtisi
During the switch from organotin stabilizers to calcium-zinc stabilizers on a PVC pipe production line, an unstable condition appeared in consecutive batches, sometimes normal and sometimes discolored, with the product yellowness fluctuation range reaching ±6 units.
Neden Analizi
Cross-contamination exists between organotin stabilizers and calcium-zinc stabilizers inside the equipment; the chemical incompatibility of the two stabilizers causes abnormal local reactions; residual organotin in the screw and barrel undergoes displacement reactions with calcium-zinc components to generate unstable intermediates; the difference in lubrication formulations of the two stabilization systems causes unstable plasticization state switching; incomplete barrel cleaning with residue exceeding 2% produces interference.
Çözüm
Use a dedicated purging compound (PVC + large amount of CaCO₃ + stearic acid) to thoroughly clean the screw and barrel; it is recommended to clean 3-5 times; when changing formulations, carry out transition batch production, first producing products with a 50% new-old mixed formulation; after cleaning, test the purging compound color and confirm no discoloration before formally switching; use a lubrication formulation compatible with the calcium-zinc system to avoid sudden lubrication changes.
Temel Çıkarım
Stabilizer system switching requires strict execution of cleaning procedures and transition batch management; the lubrication difference between new and old systems is an overlooked cause of switching instability.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!