Molding Process
8 görüntüleme
PC/ABS high and low temperature impact
Sorun Belirtisi
The impact strength of PC/ABS decreases at -30°C low temperature.
Neden Analizi
The Tg of the rubber phase in ABS is about -80°C and the secondary transition of PC is at -100°C, both having good low-temperature toughness, but improper ratio and severe PC degradation cause low-temperature embrittlement.
Çözüm
Ensure the PC component is not degraded; toughening formulation design; low-temperature verification testing.
Temel Çıkarım
PC/ABS low-temperature impact requires comprehensive consideration.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!