Extrusion & Post
5 görüntüleme
Ovality of low density polyethylene pipes exceeding standard
Sorun Belirtisi
Pipe cross-section is not round, ovality exceeds tolerance.
Excessive ovality affects pipe connection and installation, and may cause leakage in socket connections and mechanical connections.
Neden Analizi
(1) Uneven cooling, inconsistent pipe shrinkage in each direction
(2) Sizing sleeve worn or improperly installed
(3) Excessive haul-off clamping force causes pipe deformation
(4) Improper pipe stacking causes deformation
(5) Cooling water temperature too high causes pipe softening and deformation
Çözüm
(1) Check the cooling system, ensure uniform pipe cooling in all directions
(2) Check the sizing sleeve, replace if worn, ensure concentric installation
(3) Adjust haul-off clamping force, avoid excessiveness
(4) Use dedicated storage racks for pipes, avoid stacking deformation
(5) Control cooling water temperature at 15-25°C
Temel Çıkarım
Excessive ovality is caused by uneven cooling or external force deformation; it needs to be solved from cooling uniformity and pipe storage.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!