Processing Machinery
5 görüntüleme
Improper processing temperature window selection for metallocene linear low-density polyethylene metallocene linear low-density polyethylene (variant: strengthened measures)
Sorun Belirtisi
Unreasonable barrel or head temperature settings lead to poor material plasticization quality, degradation or incomplete melting.
Temperature window selection directly affects melt quality and final product performance.
Especially, additional attention is needed on top of the original basis; this problem is more prominent and requires focused attention.
Neden Analizi
(1) Temperature setting is on the low side; high melt viscosity results in insufficient plasticization
(2) Temperature setting is on the high side; material thermal degradation reduces molecular weight
(3) Unreasonable temperature distribution across sections; feeding section temperature too high or plasticizing section temperature too low
(4) Material grade differences and MFR changes are not considered
(5) Ambient temperature changes are not adjusted in time
(6) On top of the original basis, additional attention is needed as process parameter fluctuations or equipment condition changes aggravate this problem
Çözüm
(1) Reasonably set the temperature range according to metallocene linear low-density polyethylene characteristics: 190-260°C
(2) Barrel temperature gradually increases from the feeding section to the homogenizing section, but does not exceed the upper limit temperature
(3) Regularly calibrate actual barrel temperature with a thermometer or infrared temperature gun
(4) Test MFR for each batch of raw material and fine-tune temperature as needed
(5) Establish standardized process parameter cards to reduce human operation differences
(6) And strengthen process monitoring; on top of the original basis, additional attention is needed to pay special attention to parameter stability
Temel Çıkarım
Temperature window selection is the foundation of processing and needs to be reasonably set according to material characteristics and actual operating experience.
In different production scenarios, targeted preventive measures need to be taken.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!