Processing Machinery
5 görüntüleme
Metallocene linear low density polyethylene MLLDPE excessive gel/gel particles（Variant: Color/Material Change Scenario）
Sorun Belirtisi
There are many gel particles and gel granules in the MLLDPE film, affecting the film appearance and mechanical properties.
The gel particle problem is particularly prominent in transparent films, reducing the product grade.In particular, when changing materials or colors, this problem is more prominent and requires key attention.
Neden Analizi
（1） MLLDPE has a narrow processing temperature window, and is not fully plasticized at low temperature\
（2） The barrel temperature is too low, and the high molecular weight fraction is not melted\
（3） The screw mixing section design is insufficient to fully plasticize MLLDPE\
（4） The raw material itself contains gel\
（5） The filter screen mesh count is too low\
（6） When changing materials or colors, process parameter fluctuations or equipment status changes aggravate this problem
Çözüm
（1） Increase barrel temperature to 240-260°C, ensure full plasticization\
（2） Optimize the screw mixing section design\
（3） Increase the filter screen mesh count to 100-150 mesh\
（4） Select MLLDPE grades with few gel particles\
（5） Regularly clean the screw and die\
（6） And do well in cleaning the transition material, paying special attention to parameter stability when changing materials or colors
Temel Çıkarım
MLLDPE gel particles are caused by insufficient plasticization, requiring increased processing temperature and strengthened filtration.Targeted preventive measures need to be taken in different production scenarios.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!