Processing Machinery
5 görüntüleme
Screw design mismatch of general-purpose polyethylene extruder
Sorun Belirtisi
The product is unevenly plasticized, the output is low or the energy consumption is high, and the screw does not match the raw material characteristics.
The screw design directly affects the plasticization quality, output, and energy consumption.
Neden Analizi
（1）The screw compression ratio does not match the density and melting characteristics of general-purpose polyethylene
（2）The screw L/D ratio is insufficient, and the plasticizing section length is not enough
（3）The design of the transition section between the screw head and the die head is improper
（4）The screw mixing elements are not suitable for this material
（5）The screw thread depth design is improper
Çözüm
（1）Select a screw compression ratio suitable for general-purpose polyethylene, generally 2.5-4.0
（2）The screw L/D ratio is at least 25:1 to ensure sufficient plasticization
（3）Optimize the transition section between the screw head and the die head to eliminate stagnant areas
（4）Select suitable mixing elements (pins, barriers, etc.) according to the material characteristics
（5）Ask professional screw designers to optimize the thread parameters according to the material characteristics
Temel Çıkarım
The screw design needs to match the material characteristics and product requirements, and a special screw needs to be customized if necessary.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!