Extrusion & Post
5 görüntüleme
Die head pressure fluctuation of heat-resistant polyethylene extruder
Sorun Belirtisi
The die head pressure gauge reading fluctuates greatly and the pressure is unstable.
Die head pressure fluctuation directly causes extrudate dimensional fluctuation and surface defects, and is an important indicator of extrusion instability.
Neden Analizi
(1) Screw output uneven, melt pressure fluctuates
(2) Screen pack clogged or broken
(3) Die head temperature fluctuates greatly, melt viscosity changes
(4) Breaker plate deformed or improperly installed
(5) Too many impurities in raw material, frequently clogging the screen pack
Çözüm
(1) Stabilize screw rotation speed and barrel temperature to ensure uniform output
(2) Regularly replace the screen pack, establish a replacement cycle
(3) Stabilize die head temperature, fluctuation controlled within ±3°C (190-230°C range)
(4) Check the breaker plate, replace if deformed, ensure installation in place
(5) Sieve raw material before use, install a magnetic grate on the hopper to remove impurities
Temel Çıkarım
Die head pressure fluctuation is caused by unstable output or filtration system problems, and extrusion parameters need to be stabilized and the filtration system maintained.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!