Extrusion & Post
12 görüntüleme
Die head pressure fluctuation of random copolymer polypropylene pipe special material extruder (Variant: strengthened measures)
Sorun Belirtisi
The die head pressure gauge reading fluctuates greatly, and the pressure is unstable.
Die head pressure fluctuation directly causes extrudate dimensional fluctuation and surface defects, and is an important indicator of extrusion instability.
In particular, extra attention is needed on the original basis, this problem is more prominent and needs key attention.
Neden Analizi
（1）The screw output is uneven, and the melt pressure fluctuates
（2）The filter screen is blocked or broken
（3）The die head temperature fluctuates greatly, and the melt viscosity changes
（4）The breaker plate is deformed or improperly installed
（5）The raw material contains many impurities, frequently blocking the filter screen
（6）On the original basis, extra attention is needed: process parameter fluctuations or equipment status changes have aggravated this problem
Çözüm
（1）Stabilize the screw speed and barrel temperature to ensure uniform output
（2）Regularly replace the filter screen and establish a replacement cycle
（3）Stabilize the die head temperature, and control the fluctuation within ±3°C (within the range of 200-220°C)
（4）Check the breaker plate, replace it if deformed, and ensure it is installed in place
（5）Sieve the raw material before use, and install a magnetic frame on the hopper to remove impurities
（6）And strengthen process monitoring; on the original basis, extra attention is needed, with special attention to parameter stability
Temel Çıkarım
Die head pressure fluctuation is caused by unstable output or filter system problems, and the extrusion parameters need to be stabilized and the filter system maintained.
In different production scenarios, targeted preventive measures need to be taken.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!