Injection Molding
12 görüntüleme
Radial streaks on the surface of PET products
Sorun Belirtisi
Radial streaks like sun rays appear on the surface of PET injection molded products centered on the gate.
Neden Analizi
When the melt enters the cavity, the temperature is on the low side and the front is cooled by the mold wall, forming ripples; injection speed is slow, mold temperature is low, and the gate is on the small side.
Çözüm
Increase melt and mold temperature; appropriately increase injection speed (multi-stage injection); enlarge the gate; mold temperature 130-150°C.
Temel Çıkarım
PET radial streaks are caused by unstable melt front flow.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!