Molding Process
6 görüntüleme
Extremely low strength at the weld line
Sorun Belirtisi
The tensile strength at the weld line of PEEK products is only 30-40% of the base material
Neden Analizi
The temperature drops sharply at the melt convergence, causing insufficient molecular chain diffusion and entanglement; PEEK molecular chains are rigid, with diffusion rate far lower than flexible chains; the convergence surface cools quickly
Çözüm
Increase the mold temperature to above 200°C to extend the fusion window of the weld surface; optimize gate design to minimize the number of weld lines; use sequential valves to control the melt convergence timing
Temel Çıkarım
PEEK weld lines are the main weak link in the product structure
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!