Sorun ve Çözüm

Yaygın plastik malzeme zorluklarına pratik yanıtlar

Makalelere Göz At →

ABAK flame retardant modification

ABAK flame retardant modification is a prerequisite for electronic and electrical applications; compatibility and dispersion are the technologies; testing ensures the rating.; After confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence

Material Analysis ABAK；flame retardant；V-0；flame retardant；compatibility；dispersion

2 görüntüleme

Tam Yanıtı Oku →

ABAK glass fiber reinforcement

ABAK glass fiber reinforcement is a performance upgrade path; dispersion and surface are the challenges; process adaptation ensures quality.; After confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence

Material Analysis ABAK；glass fiber；reinforcement；rigidity；floating fiber；dispersion

2 görüntüleme

Tam Yanıtı Oku →

ABAK flowability management

ABAK flowability and compatibility trade off against each other; optimized compatibilizer dosage is the key; grades and processes compensate for flowability.; After confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence

Material Analysis ABAK；flowability；compatibilizer；viscosity；grade；temperature

2 görüntüleme

Tam Yanıtı Oku →

Pulse effect periodic density variation appears in PTFE sintered parts

The essence of uneven density is inconsistent distribution or densification of the material during the '2079851475616104453; it is necessary to optimize the feeding method and pressure transmission.

Material Analysis density，PTFE，sintered parts occurrence，pulse effect

2 görüntüleme

Tam Yanıtı Oku →

Density stratification rings appear in centrifugal casting (annual ring patterns)

The essence of uneven density is inconsistent distribution or densification of the material during the '2079851475616104453; it is necessary to optimize the feeding method and pressure transmission.

Material Analysis density，centrifugal casting，casting

2 görüntüleme

Tam Yanıtı Oku →

Post-curing cracking

The core of curing abnormality is that the rate and degree of the crosslinking reaction deviate from the optimal window. The adjustment idea is the "three-element method": formulation (precise metering of catalyst/curing agent), temperature (precise control of mold and material temperature), and ...

Material Analysis draft angle mold polishing holding pressure cooling time release agent

2 görüntüleme

Tam Yanıtı Oku →

Low-temperature embrittlement of the product

The essence of embrittlement is that the material toughness reserve drops to a level that cannot meet the use requirements. The key to control is the "three temperatures" — processing temperature (avoid excessively high degradation), drying temperature (avoid excessively low residual moisture and...

Material Analysis embrittlement thermal degradation drying conditions recycled material ratio impact strength

2 görüntüleme

Tam Yanıtı Oku →

Insufficient tensile strength

The core cause of insufficient mechanical properties is insufficient material bonding or degradation, and the sintering/curing process needs to be optimized and the raw material quality controlled.

Material Analysis sintering temperature polymerization powder

2 görüntüleme

Tam Yanıtı Oku →

Fibers lifted when tearing off process peel ply

The essence of interlayer separation problems is insufficient interface bonding force, requiring systematic improvement from three aspects: impregnation quality, interlayer cleanliness, and process parameters.

Material Analysis fiber fibers lifted when tearing off process peel ply process optimization

2 görüntüleme

Tam Yanıtı Oku →

Improper raw material temperature (foaming power affected by temperature)

Temperature control is a key parameter of the foam '2079851475616104453; it is necessary to ensure that the temperature is accurate, uniform, and stable to guarantee product quality consistency.

Material Analysis density viscosity heat release cells

2 görüntüleme

Tam Yanıtı Oku →

Önceki 1 ... 130 131 132 133 134 135 Sonraki

Kategoriler

Tüm Konular 11636 Material Drying 1439 Injection Molding 1506 Molding Process 740 Molds & Tooling 1506 Processing Machinery 2025 Extrusion & Post 2239 Blow Molding 315 Thermoforming 141 Material Analysis 1343 Production & Quality 382

Sorun ve Çözüm

Kategoriler

Teklif Al