Sorun ve Çözüm

Yaygın plastik malzeme zorluklarına pratik yanıtlar

Makalelere Göz At →

Insufficient Strength of Polypropylene Film

Insufficient film strength is caused by improper material selection or process parameters, and needs to be optimized from raw materials, temperature, and blow-up ratio.

Material Analysis film strengthMFRblow-up ratiodraw ratiomaterial degradation

2 görüntüleme

Tam Yanıtı Oku →

Blow-Out/Blow-Crack of Polypropylene Blow-Molded Products

Blow-out is caused by excessive blowing pressure or poor parison quality, and the blowing process and parison quality need to be optimized.

Blow Molding blow-outblowing pressureparison wall thicknessextrusion temperaturestaged blowing

9 görüntüleme

Tam Yanıtı Oku →

Severe Sagging of Polypropylene '2079851475616104457 Parison

Parison sagging is caused by low melt strength or slow extrusion, and needs to be solved by lowering the temperature, increasing the speed, and material selection.

Blow Molding parison saggingmelt strengthextrusion temperatureextrusion speedMFR

9 görüntüleme

Tam Yanıtı Oku →

Excessive Shrinkage of Polypropylene Extruded Products

Excessive shrinkage is caused by high crystallinity or high temperature, and needs to be solved by controlling the temperature and cooling rate.

Extrusion & Post shrinkagecrystallinitymelt temperaturecooling ratehaul-off speed

2 görüntüleme

Tam Yanıtı Oku →

Insufficient Breaking Strength of Polypropylene PP Fiber

Insufficient PP fiber strength is caused by improper raw material selection or process parameters, and needs to be optimized from the material grade and drawing conditions.

Extrusion & Post fiber strengthPP fiberspinning temperaturedraw ratioside air blowing

2 görüntüleme

Tam Yanıtı Oku →

Die Head Pressure Fluctuation of Polypropylene Extruder

Die head pressure fluctuation is caused by unstable discharge or filtration system problems; the extrusion parameters need to be stabilized and the filtration system maintained.

Extrusion & Post pressure fluctuationfilter screendie head temperaturebreaker plateuniform discharge

2 görüntüleme

Tam Yanıtı Oku →

Rough Inner and Outer Walls of Polypropylene Pipe

Rough pipe walls are caused by low mold temperature or poor surface condition, and need to be solved from temperature control and mold maintenance.

Material Drying rough pipe walldie temperaturemandrel temperaturemold polishingsizing sleeve

2 görüntüleme

Tam Yanıtı Oku →

Haul-Off Speed Mismatch of Polypropylene Extruded Products

Haul-off speed mismatch needs to be solved by precisely adjusting the haul-off parameters and ensuring haul-off stability.

Extrusion & Post haul-off speedspeed matchinghaul-off slippingclamping forcehaul-off control

2 görüntüleme

Tam Yanıtı Oku →

Poor Printability of Polypropylene Film

Poor printability is caused by low surface energy, and the ink adhesion needs to be improved by increasing the surface tension through corona treatment.

Extrusion & Post printabilitysurface energycorona treatmentink adhesionsurface tension

2 görüntüleme

Tam Yanıtı Oku →

Difficulty in Process Parameter Optimization Caused by Wide Temperature Window of Polypropylene PE Raw Material

PE temperature window optimization needs to be advanced from two aspects: systematic experiments and experience accumulation.

Processing Machinery temperature optimizationPE gradeDOEprocess parameterstemperature database

2 görüntüleme

Tam Yanıtı Oku →

Önceki 1 ... 149 150 151 152 153 154 155 ... 1164 Sonraki

Kategoriler

Tüm Konular 11636 Material Drying 1439 Injection Molding 1506 Molding Process 740 Molds & Tooling 1506 Processing Machinery 2025 Extrusion & Post 2239 Blow Molding 315 Thermoforming 141 Material Analysis 1343 Production & Quality 382

Sorun ve Çözüm

Kategoriler

Teklif Al