Unstable feeding

Fluctuation of material amount and temperature fed to the calender roll nip. When this defect appears in calender molded products, it is usually closely related to process links such as roll gap adjustment, roll temperature distribution, feed uniformity, or winding tension control. Defects in calendered products often have transverse distribution characteristics, directly associated with roll surface condition and material bank behavior. Continuous occurrence will affect the film's appearance, thickness uniformity, and subsequent processing performance; troubleshooting must start from both roll system adjustment and the feed system.

1. Comprehensive factors: Upstream banbury or extruder output fluctuation. 2. Comprehensive factors: Filter screen clogging. 3. Process parameter factors: Unstable feeder (oscillating belt or extrusion feed) speed. 4. Comprehensive factors: Uneven mixing of multiple batches of material. 5. Roll gap adjustment factors: Crown and cross-angle compensation of calender rolls is the core means of controlling the transverse thickness distribution of the film. Crown design is based on roll deflection calculations; if it does not match the actual process load, it will cause abnormal transverse distribution of film thickness — thicker in the middle and thinner at both ends, or an inverse bow-shaped distribution.

1. Process parameter optimization and adjustment: Stabilize process parameters of upstream equipment. 2. Mold/tooling improvement and maintenance: Replace screens at regular intervals. 3. Equipment inspection and system maintenance: Calibrate feeder conveying speed. 4. Material/formulation optimization: Strengthen batch homogenization mixing before feeding. 6. Preventive management: Establish standardized process parameter cards and quality control limits for each mold/product, and regularly conduct process capability index (CPK) evaluations. For recurring problems, use fishbone diagrams or 5Why analysis to trace the root cause, and solidify countermeasures as PFMEA control points. Establish a regular equipment maintenance system and implement life management for key tooling such as dies/spinnerets/calender rolls/coating heads.

This problem is a typical manifestation of unstable feeding in calender molding. The core of the solution lies in precise adjustment of roll gap compensation, uniform control of roll temperature distribution, and assurance of feed system stability. It is recommended to start troubleshooting from roll system parameters and gradually go deeper into the equipment and formulation levels.