Material Analysis
6 مشاهدة
HDPE pipe ovality (insufficient sizing)
ظاهرة المشكلة
The pipe is elliptical and difficult for socket connection, and the vacuum pressure test of the vacuum sizing tank is low.
تحليل الأسباب
Insufficient vacuum pressure prevents the softened pipe blank from closely attaching to the sizing sleeve; uneven spray water pattern makes one side cool and shrink faster; excessive roller spacing causes the incompletely cooled pipe to sag and deform.
الحل
①Confirm the vacuum pump provides stable and sufficient negative pressure; ②clean all spray nozzles to ensure uniform water curtain; ③densify roller support to prevent sagging; ④align the production line centerline.
الخلاصة الأساسية
Ovality is the result of the combined action of sizing, cooling, and support; systematic investigation from the four aspects of vacuum, water curtain, rollers, and centerline gives the best effect.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!