Processing Machinery
9 مشاهدة
HDPE film bubble instability (spiral swing)
ظاهرة المشكلة
The film bubble swings in a spiral shape, the frost line fluctuates, and the film thickness changes periodically.
تحليل الأسباب
Low melt strength, spiral disturbance of the air ring airflow, too low frost line or excessive die lip shear heat can all induce spiral film bubble instability.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
الحل
①Switch to a high molecular weight low melt index formulation; ②open the air vent wider or reduce the air volume to weaken the airflow impact; ③raise the frost line height; ④widen the die gap to reduce shear heat.
الخلاصة الأساسية
Spiral swing is a comprehensive problem of melt strength and airflow stability; the formulation and air ring are adjusted in both directions, and the effect is judged by a stable frost line.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!