Extrusion & Post
7 مشاهدة
LCP Product Delamination and Peeling
ظاهرة المشكلة
Layered peeling appears on the product surface.
تحليل الأسباب
The melt front rolls over and folds on the cavity surface (flow front rollover); improper injection speed or flow front temperature fluctuation disorders surface orientation and causes delamination.
الحل
①Optimize the injection speed curve for steady filling; ②appropriately increase melt and mold temperature; ③optimize the gate to reduce disturbance; ④check hot runner temperature uniformity.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
LCP delamination is related to flow front behavior; steady filling is the key to prevention.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!