Injection Molding
8 مشاهدة
LDPE Shrinkage Dominated by Cooling Time
ظاهرة المشكلة
Adjusting injection pressure has limited effect on improving LDPE shrinkage, while the influence of cooling time is immediate.
تحليل الأسباب
Taguchi experiments confirm: the most significant factor for LDPE shrinkage is cooling time, followed by holding pressure, with injection pressure having the least influence; this is contrary to most people's machine-tuning intuition.
الحل
①For shrinkage problems, optimize cooling time first; ②Next adjust holding pressure; ③Injection pressure has the least influence on shrinkage and need not be adjusted first; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability.
الخلاصة الأساسية
The correct order for LDPE shrinkage management is cooling, holding, injection; design of experiments data overturns the priority of experience-based machine tuning; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!