Extrusion & Post
6 مشاهدة
LDPE Film Winding
ظاهرة المشكلة
Interlayer adhesion of LDPE film after winding
تحليل الأسباب
Excessive winding tension or high film temperature causes interlayer adhesion; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
الحل
Taper control of winding tension; fully cool the film; add slip agent; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate the effective measure
الخلاصة الأساسية
Anti-blocking in winding relies on tension and slip agent; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!