Material Drying
6 مشاهدة
LDPE Regrind Bubbles
ظاهرة المشكلة
Bubbles increase in LDPE film blended with regrind
تحليل الأسباب
Regrind is fluffy and traps air, and absorbs moisture; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
الحل
Densify regrind by pelletizing; drying; control the blending ratio; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate the effective measure
الخلاصة الأساسية
Regrind bubbles rely on densification and drying; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!