Extrusion & Post
6 مشاهدة
LLDPE blown film bubble instability
ظاهرة المشكلة
LLDPE bubbles wobble more easily than LDPE, with large thickness deviation and uneven winding.
تحليل الأسباب
LLDPE molecular chains are linear and melt strength is lower than LDPE, so the bubble's anti-disturbance ability is weak; excessive melt temperature and insufficient cooling further weaken stability.; During on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based only on experience.
الحل
①Blend in a small amount of low melt index LDPE to increase melt strength; ②control melt temperature to prevent excessive shear heat; ③improve cooling efficiency using cold air internal cooling; ④use a bubble stabilizer.
الخلاصة الأساسية
LLDPE bubble stability is inherently weaker than LDPE; blending LDPE is the most common improvement method, and combining with cooling and bubble stabilizing devices gives better results.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!