Processing Machinery
6 مشاهدة
LLDPE film screw shear heat
ظاهرة المشكلة
Measured melt temperature is higher than the set value; the bubble is unstable and the film surface yellows.
تحليل الأسباب
LLDPE's high viscosity makes screw shear heating significant; at high speed, shear heat can make the melt temperature exceed the set value by tens of degrees.; During on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based only on experience.
الحل
①Reduce screw speed; ②optimize screw compression ratio; ③calibrate the process with measured melt temperature; ④water-cool the screw when necessary.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability.
الخلاصة الأساسية
Shear heat is an invisible variable in LLDPE temperature control; measured melt temperature should be used as the process benchmark.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!